Technical details of the optris Xi 400

• Scope of supply:
  Process imager Xi 400
  USB cable (1 m)
  Standard PIF cable (1 m) incl. terminal block
  Mounting bracket with nut
  Software package optris PIX Connect
• Detector: FPA, uncooled (17 µm pitch)
• Optical resolution: 382 x 288 pixels
• Spectral range: 8 – 14 µm
• Temperature range (scalable via programming keys or software):
  –20 °C … 100 °C
  0 °C … 250 °C
  (20) 150 °C … 900 °C ¹⁾
• Frame rate: 80 Hz / 27 Hz
• Microscope optics:
  18° x 14° (f = 20 mm)
• Smallest measuring spot (FOV): 81 µm @ 90 mm
• Instantaneous Field of View (IFOV): 80 µm
• MFOV: 240 µm @ 90 mm
• Focus: Manual motor focus
• Distance-to-spot ratio: 390:1 (18° optics)
• Thermal sensitivity (NETD): 80 mK @ 27 Hz
• System accuracy (at ambient temperature 23 ± 5°C): ±2 °C or ±2 %, whichever is greater
• PC interface: USB 2.0 / optional USB to GigE (PoE) conversion
• Process interface (PIF):
  Standard PIF:
  0–10 V input, digital input (max. 24 V), 0–10 V output
  Industrial PIF:
  2 x 0–10 V inputs, digital input (max. 24 V), 3 x 0–10 V outputs,
  3 x relay (0–30 V / 400 mA), faile-safe relay
• Cable length (USB): 1 m (standard), 3 m, 5 m, 10 m, 20 m
• Ambient temperature (T_Amb): 0 °C…50 °C
• Relative humidity: 10 – 95 %, non-condensing
• Enclosure (size / rating):Ø 36 mm x 100 mm (M30x1 thread) / IP 67 (NEMA 4)
• Weight (without mounting bracket): 216 – 220 g (depending on lens)
• Shock ²⁾: IEC 60068-2-27 (25 G and 50 G)
• Vibration ²⁾:
  • IEC 60068-2-6 (sinus shaped)
  • IEC 60068-2-64 (broadband noise)
• Tripod mount: 1/4-20 UNC
• Power supply: USB powered

¹⁾ Accuracy statement effective from 150 °C
²⁾ For more details see operator’s manual

Areas of application for the optris Xi 400 Microscope optics

Circuit boards are a core part of electronic devices. They keep getting smaller while having to be more powerful at the same time. Temperatures of assembled circuit boards can easily be measured with the microscope optics of the optris Xi 400 thermal imager, thus identifying overheated areas quickly and preventing possible defects.
The causes for excessive temperatures can be manifold: defective components, incorrectly dimensioned circuit paths or poorly soldered joints.

Thermography software optris PIX Connect included

All IR cameras are delivered with the thermography software optris PIX Connect, which has been developed specifically for the extensive documentation and analysis of thermal images. It allows you to analyse temperature data in real time as well as the remote control of your infrared camera. Furthermore, you can setup individual alarm levels for your process and define visual or acustic alarm signals.

Our thermography software is licence-free and can easily be adjusted to your requirements.

All optris infrared cameras are compatible with the Data Acquisition (DAQ) Software Dewesoft X by